KK2000 Spray

A non-flammable alternative to KK100.

Properties:

• Non flammable
• Smaller can (400ml opposed to 500ml) - easier to handle
• 37% more coverage than KK 100
• Lower risks of stains
• Higher economic output due to increased cost-effectiveness
• Spray glue for temporary adhesion
• Will stick two pieces of any material together for a period of approximately 30 hours
• Non toxic
• Odourless
• Causes no health hazard
• Will not gum up needles
• CFC free

Uses:

• Stretchy knits: Significantly reduces fabric movement for sweaters and knits
  Spray backing and hoop with knit to reduce fabric distortions
• Appliqué: Holds die / laser cut pieces in place
  Spray die cut and place (or re-position if necessary) to hold fabric during embroidering
• Slippery material: Helps eliminate puckering, great for jacket backs and heavy fill designs
  Spray backing and hoop with fabric
• Unfinished garment: Holds fabric in place, especially good for pockets and patches
  Spray fabric and stick to hooped backing
• Non-hooped items: Eliminates hoop marks, try it on collars and cuffs
  Spray fabric and stick to hooped backing
• Screen Printing: Provides a tacky surface without stains, leaves no residue

How to use KK 2000 and care for cans:

1. Hold can 25/30cm from surface to be sprayed, as upright as possible.
2. Press nozzle down as far as possible on each spray, to ensure correct concentration of glue.
3. As can nears empty it may be necessary to rotate spray nozzle, to finish contents of can.
4. Should spray nozzle clog up, turn can upside down and spray. If this does not unclog nozzle, exchange with nozzle from another can.
5. IMPORTANT: never insert needles or similar object into nozzle. This may deform spray channel causing changes in misting pattern.
6. To store, lay cans on their side.